Show Me, Tell Me, Questions & Answers Explained For Polish Candidates
QUESTION- Show me how you would verify that the direction indicators are working.
ANSWER- Making use of the indicators or hazard warning button and verify functioning of all indicators. (may do turn ignition on, prompt not to start off engine)
Question- Tell me how you would examine that the brakes are functional ahead of beginning a journey.
ANSWER- Brakes should not really feel spongy or slack. Brakes should be examined as you set off. Automobile should not pull to one side.
QUESTION- Identify exactly where the windscreen washer reservoir is and tell me how you would examine the windscreen washer level.
ANSWER- Determine reservoir and clarify how to verify quantity.
QUESTION- Display to me how you would check that the brake lights are functioning on this car. (I can support you, if you want switch the ignition on, make sure you don’t start off the engine)
ANSWER- Run brake pedal, make use of reflections in windows, garage doorways, and so forth, or ask someone to help. (may do turn ignition on, advise not to start off engine)
QUESTION- Show me / describe how you would examine that the power assisted steering is functioningahead of starting a journey.
ANSWER- If the steering becomes hefty the system may not be functioning properly. Prior to beginning a journey two basic checks can be made. Mild pressure on the steering wheelcircle, sustained while the engine is started, could show in a small but obvious movement as the system begins to operate. Alternatively turning the steering whee simply soon after moving off could offer an rapid sign that the power support is operating.
QUESTION- Inform me where you would locate the facts for the suggested tyre pressures for this car and how tyre pressures ought to be checked.
ANSWER- Producer’s guide, use a reliable pressure gauge, verify and alter pressures when tyres are cold, don’t mostly forget the spare tyre, remember to refit valve caps.
QUESTION- Display to me how you would verify the car parking brake (handbrake) for extreme wear, ensure you hold secure control of the vehicle
ANSWER- Utilize footbrake firmly. Demonstrate by making use of parking brake (handbrake) so that once it is completely utilized it secures itself, and is not at the end of the working travel.
QUESTION- Determine in which the windscreen washer reservoir is and tell me how you would check the windscreen washer stage. Identify reservoir and clarify how to check degree.
ANSWER – Open up the bonnet, determine exactly where you would examine the engine oil stage and inform me how you would examine that the engine has enough oil. Establish dipstick / oil stage indicator, describe check of oil level against the minimum/maximum markers.
QUESTION- Tell me in which you would uncover the info for the suggested tyre pressures for this car and how tyre pressures should be checked.
ANSWER- Manufacturer’s guide, use a dependable pressure gauge, verify and adjust pressures when tyres are cold, don’t forget spare tyre, remember to refit valve caps.
QUESTION- Open up the bonnet, identify exactly where you would verify the engine coolant stage and tell me how you would examine that the engine has the correct stage.
ANSWER- Identify large/low degree markings on header container wherever installed or radiator filler cap, and describe how to top until correct degree.
QUESTION- Tell me how you ensure your head restraint is appropriately adjusted so it provides the ideal protection in the event of a crash
ANSWER- The head restraint ought to be adjusted so the rigid part of the head restraint is at minimum as high as the eye or top of the ears, and as close to the back of the head as is comfortable. N.B. Certain restraints may not be adjustable
QUESTION- Open the bonnet, determine the place the brake fluid reservoir is and inform me how you would verify that you possess a protected stage of hydraulic brake fluid.
ANSWER-identify reservoir, verify level in comparison to high/low markings.
Question- Tell me how you would check the tyres to guarantee that they have sufficient tread depth and that their basic condition is safe to use on the roads.
Answer – No cuts and bulges, 1.6mm of tread depth across the central ¾ of the breadth of the tyre and around the entire outer circumference.
QUESTION- Show me how you would examine that the horn is working (off road only).
ANSWER – Verification is made by employing control turn on ignition if vital).
QUESTION- Tell me how you would check the tyres to make sure that they have enough tread depth and that their common condition is safe to use on the roads.
ANSWER- No cuts and bulges, 1.6mm of tread depth throughout the centrall ¾ of the breadth of the tyre and around the complete outer circumference.
QUESTION- Tell me how you would examine that the brakes are
working earlier than starting a journey.
ANSWER -Brakes must not feel spongy or slack. Brakes should be tested as you set off. Vehicle should not drag to one side.
QUESTION- Show me how you would clean the windscreen using the windscreen washer and wipers
ANSWER- Function control to scrub and wipe windscreen (turn ignition on if necessary)
QUESTION- Inform me how you would examine that the headlights & tail lights are functioning. (No need to exit vehicle)
ANSWER- Clarification: Function switch (turn on ignition if essential), after that walk the perimeter of vehicle. (As this is a “Tell Me” question, there is no need to physically verify the lights.)
QUESTION- Display to me how you would set the demister controls to clear all the windows effectively, this should involve both forward and rear screens
ANSWER -Set all relevant controls which includes; fan, temperatures, air direction / supply and warmed up display screen to crystal clear windscreen and windows. Engine does not need to be began for this demonstration
Question -Show me how you would activate on the rear fog lights and explain once you would use it/them. (No want exit vehicle)
ANSWER -Operate switch turn on dipped headlights and ignition if necessary). Verify warning light is on. Clarify use.
QUESTION- Inform me how you would know if there was a difficulty with your anti lck braking system A.B.S
ANSWER- Warning light should illuminate if there is a fault with the anti lock braking system
Question- Show me how you would check that the brake lights are working on this car. (I can help you, if you do switch the ignition on, make sure you don’t start off the engine)
ANSWER – Function brake pedal, exercise reflections in windows, storage doors, etc, or ask another person to help. (may need to turn ignition on, prompt not to start engine)
QUESTION- Inform me how you would examine that the headlights & tail lights are functioning. (No do exit automobile)
ANSWER – Clarification: Function switch turn on ignition if essential), afterwards stroll round the vehicle. (As this is a “Inform Me” question, there is no do physically verify the lights.)
QUESTION -Show me how you swap your headlight from dipped to major beam and clarify how you would perceive the principal beam is on while within the car
ANSWER- Work switch (with ignition or engine on if vital), check with primary beam forewarning light on dashboard
QUESTION- Tell me how you would know if there was a trouble with your anti lock braking system
ANSWER- Alerting light should illuminate if there is a fault with the anti lck braking system
More Information About This Topic As Well A Wide Range Of Polish Translated Study Material Is Available From Our Websitewww.Successfuldriver.com
This includes the best selling titles;
Driving Theory Test Polish Translation Interactive ALL 3 Tests In One Product
Hazard Perception Test Polish Translation
Highway Code Polish Translation